Best 22 Hadco Lightings for 2019

 

Hadco Lighting Mu5_g Mu5 Medium Mushroom Pathlyte 120v Verde Green

Hadco Lighting Mu5_g Mu5 Medium Mushroom Pathlyte 120v Verde Green

Hadco Lighting Mu5_g Mu5 Medium Mushroom Pathlyte 120v Verde Green - Verde green.

 

Hadco Lighting P3_g P3-g Small Horizon Pathlyte Verde 120v 120v

Hadco Lighting P3_g P3-g Small Horizon Pathlyte Verde 120v 120v

Hadco Lighting P3_g P3-g Small Horizon Pathlyte Verde 120v 120v - S. Lower wattage lamps are acceptable. Fasteners are 300 series stainless steel. Height 18 1/2″ (470mm) width 6″ (152mm) max. Safety standards for wet locations. Weight 2. Electrical assembly medium base phenolic socket with nickel-plated screw shell and center contact. Certifications etl listed to u. Lamp is not included. Cetl listed to canadian safety standards for wet locations. Lamping 75w maximum a19 lamp. Stem is extruded aluminum, sold separately. 85 lb. Laboratory tested for superior weatherability and fade resistance in accordance with astm b117 specifications. 1/2″ nps male threads to screw onto accessory mounting stake or junction box, sold separately. Manufactured to iso 90012008 standards. Housing die-cast aluminum. Optical assembly painted, tempered glass jar with clear glass top. Finish thermoset polyester powdercoat is electrostatically applied after a five-stage conversion cleaning process and bonded by heat fusion thermosetting. Warranty three-year limited warranty. Fixture is pre-wired with 18 awg black, white, and ground wires.

 

Hadco Lighting S3g S3 - 3&quot Mounting Stake Verde Green

Hadco Lighting S3g S3 – 3" Mounting Stake Verde Green

Hadco Lighting S3g S3 – 3" Mounting Stake Verde Green - Verde green.

 

Hadco Lighting Bl5016-as7bab Bl5016 Aluminum Accent Light Black 20w Mr16 Lamp Type Included

Hadco Lighting Bl5016-as7bab Bl5016 Aluminum Accent Light Black 20w Mr16 Lamp Type Included

Hadco Lighting Bl5016-as7bab Bl5016 Aluminum Accent Light Black 20w Mr16 Lamp Type Included - 20w mr16 lamp type included. Black.

 

Hadco Lighting SRL4_H SRL4 Low Voltage Decklyte Bronze

Hadco Lighting SRL4_H SRL4 Low Voltage Decklyte Bronze

Hadco Lighting SRL4_H SRL4 Low Voltage Decklyte Bronze - The srl4 decklyte is capable of harnessing the superior qualities of xenon bulbs and can support a xenon bulb of up to 10 watts, which is equivalent to about 40 watts of conventional lighting power. 30 lbs. The finish is obtained through an electrostatically applied thermoset polyester powder coat, which makes the coating durable and weather resistant. Hadco lighting takes care to see that all the components of the srl4 deck light are manufactured in-house, thereby conforming to its international quality standards. ) And is capable of operating in wet conditions. The deck light is extremely light in weight (about 0. The srl4 low voltage decklyte from hadco lighting is a low voltage outdoor deck light housed in die cast aluminium in black and bronze finishes.

 

Hadco Lighting Cul6s7 Hadco Lighting Cul6 Medium Copper Pathlyte Low Voltage Wmounting Stake 12v

Hadco Lighting Cul6s7 Hadco Lighting Cul6 Medium Copper Pathlyte Low Voltage W/mounting Stake 12v

Hadco Lighting Cul6s7 Hadco Lighting Cul6 Medium Copper Pathlyte Low Voltage W/mounting Stake 12v - The light is mostly dissipated downwards through a reflective white powder coat on the underside of the roof. The stem of the cul6 is about 294 mm long, while its head is 6″ in diameter. The stem of the cul6 pathlyte is made out of copper and the roof is made from spun copper. From a safety point of view and to allow the light fixture to function in wet conditions, the entire wiring is teflon coated and capable of withstanding temperatures of up to 250° c. Between the two is a brass threaded adapter which can be unscrewed, refitted with the bulb and screwed back on, without using any tools for changing the bulbs. The copper finish ensures that the pathlyte will gradually gain its own unique patina over time. The hadco lighting cul6 copper pathlyte is a low voltage path lighting fixture with a lamp rating of up to 20 watts and operational voltage of 12 volts.

 

Hadco Lighting BL5016-HS7BAB BL5016 Aluminum Accent Light Bronze 20W MR16 Lamp Type Included

Hadco Lighting BL5016-HS7BAB BL5016 Aluminum Accent Light Bronze 20W MR16 Lamp Type Included

Hadco Lighting BL5016-HS7BAB BL5016 Aluminum Accent Light Bronze 20W MR16 Lamp Type Included - A 360 degree fully adjustable swivel arm allows for precise lighting along with an angled lens for self-cleaning. The socket features a retention clip to secure the lamp in place. The housing is constructed of double gasketed, die cast marine-grade alloy aluminum for long life. The fixture is ul, cul listed for a 50 watt mr16 lamp. The five-stage powder-coating process ensures optimum outdoor lifespan even when exposed to the elements. The glass optical assembly is placed at a slight angle of about 10o to facilitate self-cleaning or simplify the lens cleaning process. Hadco assures quality and longevity by providing even the nuts, bolts and fasteners in stainless steel to prevent rusting or corrosion when placed outdoors. The bl5016 accent light from hadco lighting is a low voltage accent light which is mostly used outdoors and available in bronze, sienna, verde and black finishes. Hadco lighting promotes lights which are both decorative and functional and the bl5016 accent light is a prime example. It uses 12 volts to power bulbs up to 50 watts and a fully rotatable shroud with a flexible swivel for perfect focus of light at the desired spot. With vibration-proof serrated teeth along with the base of the housing, it provides a positive lock.

 

Hadco Lighting MUL4_AS7 MUL4 Small Mushroom Pathlyte Low Voltage Black

Hadco Lighting MUL4_AS7 MUL4 Small Mushroom Pathlyte Low Voltage Black

Hadco Lighting MUL4_AS7 MUL4 Small Mushroom Pathlyte Low Voltage Black - Hadco lighting offers these path lighting fixtures in a variety of finishes — speckled stone, brass, bronze, verde, sienna, black and natural cast bronze. The mul4 small mushroom low voltage pathlyte from hadco lighting has a stem which is about 19. The mul4 pathlyte assembly runs on the lower voltage of 12 v and is safety-certified for use in wet locations. A powder coated finish further protects the fixture from losing its luster due to rain or sun. 5â€ù long and a dome 5 1/16â€ù in diameter. A spun aluminium reflector amply reflects the downcast light of the 20 watts lamp. The mul4 mushroom is a path light mostly installed outdoors, hence the roof is made from stainless steel to protect it from the elements.

 

Hadco Lighting Pl39-ks7 Pl39-ks7 12 Volt 2 Tier Pagoda Path Light With Stake 12v

Hadco Lighting Pl39-ks7 Pl39-ks7 12 Volt 2 Tier Pagoda Path Light With Stake 12v

Hadco Lighting Pl39-ks7 Pl39-ks7 12 Volt 2 Tier Pagoda Path Light With Stake 12v - 12 volt system requires remote transformer, not included. Width 6″ (152mm) maximum weight 3 lb. Warranty three-year limited warranty. Lower wattage lamps are acceptable. Certifications etl listed to u. 12 volt fixture is pre-wired with 6-ft. Optical assembly clear tempered glass lens. “” Nps male threads to screw onto accessory mounting stake (included) or junction box (sold separately). Thermoset polyester powdercoat is electrostatically applied after a five-stage conversion cleaning process and bonded by heat fusion thermosetting. Cetl listed to canadian safety standards for wet locations. Finish laboratory tested for superior weatherability and fade resistance in accordance with astm b117 specifications.   Housing die-cast aluminum. Manufactured to iso 9001-2008 standards. Electrical assembly single contact bayonet (s-8). Low voltage quick connector, catalog #lvc3 included for easy hook-up to the low voltage supply cable, not included. S. Stem is extruded aluminum. Lamping 27w maximum s-8 (1156) lamp. Pigtail of 18-2 awg, 105 c, spt-1w wire. Lamp is included with fixture. Safety standards for wet locations. Height 7″ (178mm).

 

Hadco Lighting Bu3-g Bu3 Composite Bullyte Line Voltage Accent Verde Green 75w Par30

Hadco Lighting Bu3-g Bu3 Composite Bullyte Line Voltage Accent Verde Green 75w Par30

Hadco Lighting Bu3-g Bu3 Composite Bullyte Line Voltage Accent Verde Green 75w Par30 - Verde green. 75w par30.

 

Hadco Lighting GAHL1-AC GAHL1 Copper Downlyte Low Voltage Accent Copper Finish 12V

Hadco Lighting GAHL1-AC GAHL1 Copper Downlyte Low Voltage Accent Copper Finish 12V

Hadco Lighting GAHL1-AC GAHL1 Copper Downlyte Low Voltage Accent Copper Finish 12V - Color will age naturally to a fine dark copper patina. Natural copper is bright polished, untreated copper. Fixture sold seperately shade only 4″ wide. Spun solid copper roof with copper stem machined brass threaded adapter for tool-less relamping. ½” Nps male threads to screw onto accessory mounting stake and junction box sold seperately.

 

Hadco Lighting Bu4-a Bu4 100w Par38 Composite Bullyte Line Voltage Black

Hadco Lighting Bu4-a Bu4 100w Par38 Composite Bullyte Line Voltage Black

Hadco Lighting Bu4-a Bu4 100w Par38 Composite Bullyte Line Voltage Black - Width 6 1/4″ (159mm) length 16 1/2″ (419mm) max. Fully-adjustable swivel arm with vibration-proof locking teeth. Hid par30 mh or mv acceptable with remote ballast (not included). Shroud is optional. Warranty ten-year limited warranty. Lens is siliconed into shroud. S. Lower wattage lamps are acceptable. 100w maximum mh medium base e17 100w maximum mh medium base par38 lamp is not included.  Housing fully rotatable shroud, gasketed, ultem high performance polymer composite. Bun4, buw4, shroud included. 75 lb. Certifications etl listed to u. Weight 3. ” Nps male threads to screw onto accessory mounting stake or junction box, sold separately. One-piece injection molded ultem high performance polymer composite. Manufactured to iso 90012008 standards. Safety standards for wet locations. Ballast must order inground (ibh) or above ground (abh) ballast housing separately. Gasketing is silicone. Fasteners are 300 series stainless steel. Electrical assembly 4kv rated porcelain mini-can base. Nickel-plated screw shell with center contact. Optical assembly one-piece injection molded ultem high performance polymer with silicone o-ring gasket. Lamping 100w maximum par30/r30 or par38/r40 medium base lamp. Cetl listed to canadian safety standards for wet locations. Finish composite is textured, pressure formed, molded-in-color. Bu4, shroud optional.

 

Hadco Lighting Tc354_15 Tc354-15 300w Multitap Painted Transformer 120v

Hadco Lighting Tc354_15 Tc354-15 300w Multitap Painted Transformer 120v

Hadco Lighting Tc354_15 Tc354-15 300w Multitap Painted Transformer 120v - Consult factory for details. Exterior mounting, transformer should be mounted on the wall, structure, or post in the vertical position. 1/2″ knockout on one side for hardwiring or accessory mounting. One (1) 1-1/2″ conduit inlet. Cetl listed to canadian safety standards for wet locations. Electrical assembly 6-ft heavy-duty 18-3 awg, 105° c, sjt power cord with 3 prong grounded wall plug. Shielded between primary and secondary. Insulation type transformers for safe operation. 50/60hz input. Weather-proof compartment for plug-in time clock and photo cell. Height 11 3/8″ (289mm) width 6 3/8″ (162mm) depth 5 5/8″ (143mm) max. Manufactured to iso 90012008 standards. Euro-board terminal block for easy low voltage cable attachment. Weight 13. Certifications etl listed to u. 16 lb. Line voltage amperage draw 300va = 2. Safety standards for wet locations. 7 amps. Housing housing is dark gray polyester powder-coat formed steel case with stainless steel screws and lockable captive door, hinged on side. Cable entries should be positioned downward. S. The transformer is thermally protected on primary, and secondary side is protected by circuit breaker. Four (4) 1/2″ knockouts for low-voltage exit, on bottom of housing. Warranty ten-year limited warranty. Internal transformer is epoxy encapsulated. 12, 13, 14, and 15 volt output taps for design flexibility and longer cable run capability.

 

Hadco Lighting BPL36-HS7 BPL36S7 12 Volt Non-Metalic Bullyte with Stake Bronze

Hadco Lighting BPL36-HS7 BPL36S7 12 Volt Non-Metalic Bullyte with Stake Bronze

Hadco Lighting BPL36-HS7 BPL36S7 12 Volt Non-Metalic Bullyte with Stake Bronze - 2 lb. Fully-adjustable swivel arm with vibration-proof locking teeth”½” nps male threads to screw onto accessory mounting stake (included) or junction box (sold separately). Electrical assembly double screw terminal socket. Width 5 1/8″ (130mm) length 6 3/8″ (162mm) max. Cetl listed to canadian safety standards for wet locations. Manufactured to iso 90012008 standards. 12 volt system requires remote transformer, not included. Lower wattage lamps are acceptable. S. Finish composite is textured, pressure formed, molded-in-color. Fasteners are 300 series stainless steel. Warranty ten-year limited warranty. Weight 1. 12 volt fixture is pre-wired with 3-ft pigtail of 18-2 awg, 105° c, spt-1w wire. Lamping 50w maximum par36 screw terminal lamp. Safety standards for wet locations. Certifications etl listed to u. Housing one-piece injection molded polyester resin. Low voltage quick connector, catalog #lvc3 included for easy hook-up to the low voltage supply cable, not included. Fully rotatable shroud, injection molded polyester resin.

 

Hadco Lighting TSS954_15 TSS954-15 - 900W Multitap Transformer 120V

Hadco Lighting TSS954_15 TSS954-15 – 900W Multitap Transformer 120V

Hadco Lighting TSS954_15 TSS954-15 – 900W Multitap Transformer 120V - Natural copper is bright polished, untreated copper color will age naturally to a fine dark copper patina. Bronze. Color will age naturally to a fine dark copper patina. Replacement shade for cul2d. Shade only, stake and junction box sold seperately.

 

Hadco Lighting BU4-H BU4 100W Par38 Composite Bullyte Line Voltage Bronze

Hadco Lighting BU4-H BU4 100W Par38 Composite Bullyte Line Voltage Bronze

Hadco Lighting BU4-H BU4 100W Par38 Composite Bullyte Line Voltage Bronze - Lamping 100w maximum par30/r30 or par38/r40 medium base lamp. Optical assembly one-piece injection molded ultem high performance polymer with silicone o-ring gasket. Ballast must order inground (ibh) or above ground (abh) ballast housing separately. Warranty ten-year limited warranty. Hid par30 mh or mv acceptable with remote ballast (not included). Lower wattage lamps are acceptable. Gasketing is silicone. Lens is siliconed into shroud. Electrical assembly 4kv rated porcelain mini-can base. Width 6 1/4″ (159mm) length 16 1/2″ (419mm) max. Bu4, shroud optional. Finish composite is textured, pressure formed, molded-in-color. Nickel-plated screw shell with center contact. 100w maximum mh medium base e17 100w maximum mh medium base par38 lamp is not included. One-piece injection molded ultem high performance polymer composite. Fasteners are 300 series stainless steel. Weight 3. Bun4, buw4, shroud included. 75 lb.  Housing fully rotatable shroud, gasketed, ultem high performance polymer composite. Manufactured to iso 90012008 standards. ” Nps male threads to screw onto accessory mounting stake or junction box, sold separately. Fully-adjustable swivel arm with vibration-proof locking teeth. Safety standards for wet locations. S. Certifications etl listed to u. Shroud is optional. Cetl listed to canadian safety standards for wet locations.

 

Hadco Lighting Ig3h Ig3h Rock Guard With Lens For Il336 Well Light 120v Fiberglass Reinforrced Polyester Composite

Hadco Lighting Ig3h Ig3h Rock Guard With Lens For Il336 Well Light 120v Fiberglass Reinforrced Polyester Composite

Hadco Lighting Ig3h Ig3h Rock Guard With Lens For Il336 Well Light 120v Fiberglass Reinforrced Polyester Composite - 120v. Fiberglass reinforrced polyester composite rockguard with tempered clear glass lens fasteners are stainless steel accessory attaches with set screws to the top of the il336-al and il336-a inground fixtures 6″ (152mm) dia x 1 11/16″ (43mm) tall.

 

Hadco Lighting WAM1_H WAM1 Floodlyte standard Clear Lens 120V Bronze Clear Lens Clear Lens

Hadco Lighting WAM1_H WAM1 Floodlyte standard Clear Lens 120V Bronze Clear Lens Clear Lens

Hadco Lighting WAM1_H WAM1 Floodlyte standard Clear Lens 120V Bronze Clear Lens Clear Lens - Fasteners are 300 series stainless steel. 75 lb. Gasketing is silicone. Certifications etl listed to u. Lamp is not included.  Housing die-cast aluminum. Safety standards for wet locations. Lamping 75w maximum t3 mini candelabra lamp. Manufactured to iso 90012008 standards. S. Lower wattage lamps are acceptable. Height 4 7/8″ (123mm) width 6 7/8″ (175mm) length 5″ (126mm) max. Warranty three-year limited warranty. Fixture is pre-wired with 18 awg black, white, and ground wires. Electrical assembly mini-candelabra socket (e11). Fully-adjustable swivel arm with vibration-proof locking teeth. Finish thermoset polyester powdercoat is electrostatically applied after a five-stage conversion cleaning process and bonded by heat fusion thermosetting. Cetl listed to canadian safety standards for wet locations. Optical assembly clear tempered glass lens. Frosted tempered glass lens. Weight 1. ” Nps male threads to screw onto accessory mounting stake or junction box, sold separately.

 

Hadco Lighting Iul516-h Iul516 Bronze Micro Inground Low Voltage Lamp Type Not Included

Hadco Lighting Iul516-h Iul516 Bronze Micro Inground Low Voltage Lamp Type Not Included

Hadco Lighting Iul516-h Iul516 Bronze Micro Inground Low Voltage Lamp Type Not Included - 12v iul516 composite in-ground lightlamp type mr16socket base bi-pinrequires remote transformer (not included)finish brass.

 

Hadco Lighting Tm2h Tm2 Tree Mount Junction Box Bronze

Hadco Lighting Tm2h Tm2 Tree Mount Junction Box Bronze

Hadco Lighting Tm2h Tm2 Tree Mount Junction Box Bronze - Bronze.

 

Hadco Lighting MUL4_GS7 MUL4 Small Mushroom Pathlyte Low Voltage Verde Green

Hadco Lighting MUL4_GS7 MUL4 Small Mushroom Pathlyte Low Voltage Verde Green

Hadco Lighting MUL4_GS7 MUL4 Small Mushroom Pathlyte Low Voltage Verde Green - 18w maximum s-8 (1141) lamp  lamp is included with fixture  lower wattage lamps are acceptable. Verde green. Bronze. Etl listed to us safety standards for wet locations  cetl listed to canadian safety standards for wet locations  manufactured to iso 90012008 standards. Frosted tempered glass lens.

 

Hadco Lighting DWCL1_A DWCL1-A Composite Mini Beacon Black 12V 12V

Hadco Lighting DWCL1_A DWCL1-A Composite Mini Beacon Black 12V 12V

Hadco Lighting DWCL1_A DWCL1-A Composite Mini Beacon Black 12V 12V - 5 lb. Two (2) conduit inlets at bottom. Manufactured to iso 90012008 standards. Warranty ten-year limited warranty. Lamping 20w maximum t3 bi-pin lamp. Lower wattage lamps are acceptable. Fasteners are 300 series stainless steel. 12 volt fixture is pre-wired with 3-ft pigtail of 18-2 awg, 105° c, spt-1w wire. Optical assembly frosted borosilicate glass. Single-piece molded silicone gasket to prevent water, dust, and insect filtration. Electrical assembly bi-pin socket type (g4) with 250°c high temperature teflon coated wire leads. Certifications etl listed to u. 12 volt system requires remote transformer, not included.  Housing single-piece compression molded fiberglass reinforced polyester composite, factory pressure tested to ensure water will not wick or leak through. Finish composite is textured, pressure formed, molded-in-color. Cetl listed to canadian safety standards for wet locations. Safety standards for wet locations. Low voltage quick connector, catalog #lvc3 included for easy hook-up to the low voltage supply cable, not included. S. Height 8 3/4″ (222mm) width 5″ (127mm) max. Note watertight connectors and potting compound (by others) must be used to maintain a watertight seal at conduit entry points. Lamp is included with fixture. Weight 2.